+420 778 547 838 info@fermat.cz
Close
Machining centres / Vertical / DMF 260/11
Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11
Machining centres / Vertical / DMF 260/11
Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11 Machining centres / Vertical / DMF 260/11

Machining centres / Vertical / DMF 260/11

  • Inventory number 241424
  • Machine type DMF 260/11
  • Producer DMG MORI
  • YOM 2016
Control system HeidenhainTNC 530
Clamping area of table3200 x 1100 mm
Travel X-axis2600 mm
Travel Y-axis1100 mm
Travel Z-axis900 mm
Spindle speed20 - 8000 /min.
Number of driven axes4
Cooling through spindleYES
Pressure of cooling40 bar
Spindle taperSK40 .
Tool magazineYES
Number of positions in magazine30
Machine weight26850 kg

Subject to change of technical parameters.


Description

The machine is in good technical condition, under power, after agreement is possible to test it. 3D control iTNC 530 HSCI.
Full cab, coolant tank, direct metering systems, chip conveyor.
Replaced spindle, ball screws on X and Z axis, linear guides on X and Z axis.
Digital measuring probe.
Spindle runout - 0.006mm.

Similar machines

DMU 60 monoBlock
YOM: 2005
Control systemYES
Control system HeidenhainTNC 530
Clamping area of table600x1000 mm
Travel X-axis630 mm
Travel Y-axis560 mm
Travel Z-axis560 mm
Spindle speed0 - 12000 /min.
Number of driven axes5
Cooling through spindleYES
Spindle taperHSK 63 .
Table diameter600 mm
Number of positions in magazine24
Main motor power15/10 kW
Max. weight of workpiece500 kg

DMU 60 monoBlock
DMG
Inventory number: 241768
MCFV 1050 Basic
YOM: 2007
Control systemYES
Control system HeidenhainTNC 530
Clamping area of table1200 x 510 mm
Travel X-axis1020 mm
Travel Y-axis510 mm
Travel Z-axis525 mm
Spindle speed0 - 10000 /min.
Number of driven axes3
Cooling through spindleYES
Spindle taperISO 40 .
Max. load of table700 kg
Number of positions in magazine20
Main motor power25 kW
Machine dimensions l x w x h 2810 x 1895 x 2940 mm
Machine weight5200 kg

MCFV 1050 Basic
TAJMAC-ZPS, a.s.
Inventory number: 241745
MCV 1000
YOM: 0
Control systemYES
Control system HeidenhainTNC 620
Clamping area of table1300 x 600 mm
Travel X-axis1016 mm
Travel Y-axis610 mm
Travel Z-axis660 mm
Spindle speed0 - 10000 /min.
Number of driven axes3
Cooling through spindleYES
Pressure of cooling20 bar
Spindle taperISO 40 .
Machine dimensions l x w x h2700x3000x2940 mm
Machine weight5500 kg
Tool magazineYES
Number of positions in magazine20

MCV 1000
KOVOSVIT MAS, a.s.
Inventory number: 241115
DMC 635 V ecoline
YOM: 2008
Control systemYES
Control system SiemensSinumerik 810
Clamping area of table790 x 560 mm
Travel X-axis635 mm
Travel Y-axis510 mm
Travel Z-axis460 mm
Spindle speed0 - 10000 /min.
Number of driven axes3
Cooling through spindleNO
Spindle taperSK 40 .
Tool magazineYES
Number of positions in magazine20
Rapid feed30 m/min
Machine dimensions l x w x h3500x4000x2700 mm
Machine weight4500 kg

DMC 635 V ecoline
DMG MORI
Inventory number: 241037
MCFV 1050 Basic
YOM: 2007
Control systemYES
Control system HeidenhainTNC 530
Clamping area of table1200 x 510 mm
Travel X-axis1020 mm
Travel Y-axis510 mm
Travel Z-axis525 mm
Spindle speed0 - 10000 /min.
Number of driven axes3
Cooling through spindleYES
Spindle taperISO 40 .
Max. load of table700 kg
Number of positions in magazine20
Main motor power25 kW
Machine dimensions l x w x h 2810 x 1895 x 2940 mm
Machine weight5200 kg

MCFV 1050 Basic
TAJMAC-ZPS, a.s.
Inventory number: 241393