+420 778 547 838 info@fermat.cz
Close
Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A
Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A

Borers horizontal / Table - diameter of spindle over 90 mm / W 100 A

  • Inventory number 191457
  • Machine type W 100 A
  • Producer TOS Varnsdorf
Diameter of working spindle4 in
Travel X-axis64 in
Travel Y-axis44.8 in
Spindle speed7 - 1120 /min.
Cooling through spindleNO
Spindle travel - W axis36 in
Travel Z-axis50 in
Tool magazineNO
Spindle taperISO 50 .
Max. load of table3000 kg
Machine dimensions l x w x h268.4 x 138 x 120 in
Machine weight14000 kg
Main motor power11 kW
Total input17 kVA
Clamping area of table50 x 50 in
Face plate diameter24 in
Max. diameter of face turning36 in

Subject to change of technical parameters.


Description

Machine is overhauled.
Hand-controlling horizontal borer machine with fixed stand and cross-adjustable table. The machine is in the following version: X, Z, Y ground, traverse milled and undercut, more precisely glued with special material with sliding properties (Turcite, GS-super fluid, etc.), wedges ground and scraped. The worktable surface is grinded and scraped (reinovation of grooves as required). The X and Y axes are equipped with trapezoidal screws with nuts - placed in bearing housings. Headstock - Gearwheel bearings from reputable manufacturers, main place as well as main spindle manufacturing by Fermat, hydraulic tool clamping. Automatic lubrication is controlled centrally through the dispensers - the manufacturer Hytos. The machine has a telescopic covering of X- and Z axes. Machine surface adjustment - varnish according to RAL 5010 (blue – depending on customer´s wish). Electrical switchboard with programmable controller, control panel on headstock. CE cable lines are installed throughout the machine and between the machine and the electrical cabinets. The machine is equipped with digital measuring with linear rulers with accuracy of positioning indication 0.01mm for axes (X, Y, Z, W) including measuring of the round table by rotary sensor (in the center of the table). Optical reading of the angle after complete overhaul.

video
video

Similar machines

W 100 A
YOM: 1992
Control systemNO
Diameter of working spindle100 mm
Travel X-axis1500 mm
Travel Y-axis1250 mm
Spindle speed7 - 1120 /min.
Cooling through spindleNO
Spindle travel - W axis mm
Travel Z-axis1800 mm
Tool magazineNO
Spindle taperISO 50 .
Clamping area of rotary table1200x1200 mm

W 100 A
TOS Varnsdorf
Inventory number: 241881
TK 6511 B
YOM: 2008
Control systemYES
Control system SiemensSinumerik 840 D
Diameter of working spindle110 mm
Travel X-axis2000 mm
Travel Y-axis1500 mm
Spindle speed10 - 2000 /min.
Cooling through spindleNO
Spindle travel - W axis550 mm
Travel Z-axis1200 mm
Tool magazineNO
Spindle taperISO 50 .
Table dimensions1250x800 mm
Max. torque of spindle1300 Nm
Machine dimensions l x w x h5663 x 4775 x 4078 mm
Machine weight22000 kg
Max. load of table5000 kg

TK 6511 B
SCHIESS GmbH
Inventory number: 242010
40T
YOM: 2018
Control systemYES
Control system Fanuc0i-MF
Diameter of working spindle130 mm
Travel X-axis3657 mm
Travel Y-axis3048 mm
Spindle speed10 - 3000 /min.
Cooling through spindleYES
Pressure of cooling20 bar
Spindle travel - W axis730 mm
Travel Z-axis1820 mm
Tool magazineYES
Number of positions in magazine40
Spindle taperCAT 50 .
Clamping area of rotary table1524 x 4013 mm
Max. load of table20000 kg
Main motor power37/45 kW
Machine weight41730 kg

40T
Lucas
Inventory number: 182013
Microcut HBM-4
YOM: 2017
Control systemYES
Control system Fanuc31i - B
Diameter of working spindle110 mm
Travel X-axis2200 mm
Travel Y-axis1600 mm
Spindle speed35 - 3000 /min.
Cooling through spindleYES
Pressure of cooling20 bar
Spindle travel - W axis550 mm
Travel Z-axis1600 mm
Tool magazineYES
Number of positions in magazine60
Spindle taperISO50 .
Table dimensions1250x1500 mm
Max. load of table5000 kg
Axis B0,001 °
Rapid feed12 m/min
Machine dimensions l x w x h7750x4715x3700 mm
Machine weight22500 kg

Microcut HBM-4
Buffalo Machinery
Inventory number: 221640
WHN 9 B CNC
YOM: 1982
Control systemYES
Control system MefiCNC 859
Diameter of working spindle90 mm
Travel X-axis1250 mm
Travel Y-axis900 mm
Spindle speed10 - 1100 /min.
Cooling through spindleNO
Spindle travel - W axis630 mm
Travel Z-axis680 mm
Tool magazineNO
Spindle taperISO 50 .
Clamping area of rotary table1000 x 1120 mm
Max. weight of workpiece3000 kg
Machine weight13000 kg
Total input50 kVA

WHN 9 B CNC
TOS Varnsdorf
Inventory number: 192075