+420 777 339 625 
info@fermat.cz
English 
Français 
L'italiano 
Magyar 
Deutsch 
Română 
Русский 
Español 
Čeština 
12 Spis Kratka
12Wytaczarka Stołowa - średnica wrzeciona powyżej 90 mm
| Nazwa produktu | Nr inw. | Producent | Rok produkcji | Parametry | ||
|---|---|---|---|---|---|---|
 |
TK 6511 B |
242010 | SCHIESS GmbH | 2008 | : Sinumerik 840 D : 110 Przejazd osi X: 2000 mm : 1500 : 10 - 2000 : nie |
|
 |
W 100 A |
191457 | TOS Varnsdorf | : 100 Przejazd osi X: 1600 mm : 1120 : 7 - 1120 : nie : 900 |
||
 |
40T |
182013 | Lucas | 2018 | System sterowania Fanuc: 0i-MF : 130 Przejazd osi X: 3657 mm : 3048 : 10 - 3000 : tak |
|
 |
W 100 A |
241881 | TOS Varnsdorf | 1992 | : 100 Przejazd osi X: 1500 mm : 1250 : 7 - 1120 : nie : |
|
 |
WXH 100 |
241325 | KOVOSVIT MAS, a.s. | : 100 Przejazd osi X: 1200 mm : 800 : 6 - 3000 : nie : |
||
 |
Ecocut 1 |
242006 | Scharmann | 1985 | System sterowania Heidenhain: TNC 530 : 125 Przejazd osi X: 2000 mm : 1600 : 12 - 3000 : nie |
|
 |
TK 6511 B |
241971 | Fermat | 2007 | System sterowania Heidenhain: TNC 530 : 110 Przejazd osi X: 2500 mm : 1500 : 0 - 2500 : tak |
|
 |
2A622-1 |
241836 | Stanko Russia | System sterowania Heidenhain: : 110 Przejazd osi X: 1600 mm : 1000 : 12 - 1600 : nie |
||
 |
WH 10 NC |
251056 | TOS Varnsdorf | 1985 | System sterowania ESA: S430 : 100 Przejazd osi X: 1250 mm : 1100 : 16 - 1500 : nie |
|
 |
WHQ 15 CNC |
241496 | TOS Varnsdorf | 2021 | : Sinumerik 840 D : 150 Przejazd osi X: 4000 mm : 3000 : 10 - 3000 : tak |
|
 |
WFT 13 R CNC |
251175 | Fermat | 2014 | System sterowania Heidenhain: TNC 530 : 130 Przejazd osi X: 2000 mm : 2000 : 10 - 3000 : tak |
|
 |
WHN 13 |
251345 | TOS Varnsdorf | : 130 Przejazd osi X: 3500 mm : 2000 : 5 - 2500 : nie : |
||
 |
KBN 135 |
241058 | KIA | 2003 | System sterowania Fanuc: 16-M : 135 Przejazd osi X: 3000 mm : 2000 : 5 - 2000 : tak |
|
 |
IXN2000 |
241206 | CHETO | 2022 | : CNC 8065 : Przejazd osi X: 2000 mm : 1200 : 0 - 6000 : |
|
 |
WRFT 130 CNC |
251341 | Fermat | 2008 | System sterowania Heidenhain: TNC 530 : 130 Przejazd osi X: 4200 mm : 2500 : 10 - 3000 : nie |
|
 |
WHN 9B |
251006 | TOS Varnsdorf | 1981 | : 90 Przejazd osi X: 1250 mm : 900(1120) : 0 - 1120 : nie : 680 |
|
 |
BFT 102 |
242070 | UNION | 1997 | System sterowania Heidenhain: TNC 426 : 102 Przejazd osi X: 1600 mm : 1210 : 4 - 1600 : |
|
 |
WHQ 105 CNC |
231912 | TOS Varnsdorf | 2001 | System sterowania Heidenhain: TNC 430 : 105 Przejazd osi X: 1800 mm : 1250 : 0 - 2800 : nie |
|
WH 10 NC |
251150 | TOS Varnsdorf | System sterowania Heidenhain: TNC 124 : 100 Przejazd osi X: 1250 mm : 900 : 16 - 1250 : nie |
|||
 |
T 105 |
251213 | UNION | 2000 | System sterowania Heidenhain: TNC 426 : 105 Przejazd osi X: 2000 mm : 1600 : 5 - 2000 : nie |
|
 |
BFT 110/5 |
231231 | UNION | Przejazd osi X: 1985 mm : 1270 : 1270 : 25400 Rozmiary stołu: 1400 x 1600 mm : 110 |
||
 |
W 100 A |
241949 | TOS Varnsdorf | 1984 | : 100 Przejazd osi X: 1500 mm : 1250 : 7 - 1120 : nie : |
|
 |
WH 10 NC |
221109 | TOS Varnsdorf | 1985 | System sterowania NCT: 90 : 100 Przejazd osi X: 1250 mm : 900 : 16 - 1250 : nie |
|
 |
WHN 9 B CNC |
192075 | TOS Varnsdorf | 1982 | System sterowania Mefi: CNC 859 : 90 Przejazd osi X: 1250 mm : 900 : 10 - 1100 : nie |
|
 |
WHN 13 P CNC |
191459 | TOS Varnsdorf | 2024 | System sterowania Heidenhain: TNC 640 : 130 Przejazd osi X: 3500 mm : 2000 : 10 - 3000 : tak |
This kind of borer is equipped with a cross table allowing movement in two mutually perpendicular directions. The table is usually rotary, allowing found sides of the part to be machines in one clamping. However, if the workpiece does not exceed the dimensions of the machine, which is additionally equipped with an angular head, it is possible to machine from five sides with one clamping. Table type boring machines are mainly produced in smaller sizes, usually its spindle diameter is somewhere around 110 to 130 mm and the loading capacity of the table is approx. 20.000 kg.
Cross type boring machines
Table-type boring machines with cross-wise table movement, are designed for machining of small and medium-size workpieces of up to 50 tons and its table is movable only in the transverse direction, in the vertical direction the column moves along the bed. These machines are used for milling flat surfaces of long workpieces and diameter of spindle is somewhere around 80-160 mm.
All types of horizontal boring machines are conventional or CNC controlled. Among the most popular producers of CNC systems are Heidenhain, Siemens, Fanuc, Fagor.
Horizontal boring machines can be also equipped with automatic tool change which is primarily used for storage of tool holders, its manipulation and positioning without participation of human factor.
Among the main and most popular manufacturers of boring mills we have to mention: FERMAT, TOS, ŠKODA, PAMA, UNION, JUARISTI, SCHARMANN, KURAKI, WOTAN.
