Rectificadora / Entre puntos / GU 32 x 100 NC

• Núm. de inventario 251292
• Tipo de maquina GU 32 x 100 NC
• Fabricante PALMARY
• Año de fabricación 2024

Sujeto a cambio de parámetros técnicos.

Descripción

The machine is in very good technical condition, under power, after agreement is possible to test it. Worked about 100 hours.
Accessories for grinding holes. Additional spindle for the hole 1pc (10,000 rpm), with diamond dresser, without 3-jaw chuck.
- Diamond dresser for external and internal grinding wheels, upper type.
- Diamond dresser, tailstock installation.
- Set of drivers, 6 pcs.
- 2-point manual steady rest, from D10-130 mm.
- 3-point manual steady rest, clamps from D45 to D135 mm.
- 3-point manual steady rest, clamps from D130 to D250 mm.
- Adjustable 3-jaw manual chuck 7´´/178 mm
- Paper filtration of cooling emulsion 80L/min.
- Balancing device, separate stand.
- Grinding wheel with flange.
- Diamond dresser, table clamp.
- Tool and tool set.
- Carbide tips for the tailstock.
- Workpiece coolant system, separate tank.
- Hydraulic system, separate tank.
- Partial machine enclosure with sliding door with safety lock (CE)
- Mist extraction.