+421 901 767 616 
info@fermat.cz
English 
Français 
L'italiano 
Magyar 
Deutch 
Polski 
Română 
Русский 
Čeština 
Mandrinadora horizontal / Fija - husillo más de 90 mm de diámetro / W 100 A
-
Núm. de inventario 191457
-
Tipo de maquina W 100 A
-
Fabricante TOS Varnsdorf
| Diámetro de trabajo del husillo | 100 mm |
| Carrera de eje X | 1600 mm |
| Carrera de eje Y | 1120 mm |
| Giros del husillo | 7 - 1120 /min. |
| Refrigeración central | No |
| Extensión del husillo (W) | 900 mm |
| Carrera de eje Z | 1250 mm |
| Cargador de herramientas | No |
| Cono sujetador del husillo | ISO 50 . |
| Carga máxima de mesa | 3000 kg |
| Dimensiones largo x ancho x alto | 6710 x 3450 x 3000 mm |
| Peso de la máquina | 14000 kg |
| Potencia del motor eléctrico principal | 11 kW |
| Potencia total | 17 kVA |
| Área de sujeción de la mesa | 1250 x 1250 mm |
| Diámetro de placa frontal | 600 mm |
| Diámetro máx. de torneado frontal | 900 mm |
Sujeto a cambio de parámetros técnicos.
Descripción
Machine is overhauled.
Hand-controlling horizontal borer machine with fixed stand and cross-adjustable table. The machine is in the following version: X, Z, Y ground, traverse milled and undercut, more precisely glued with special material with sliding properties (Turcite, GS-super fluid, etc.), wedges ground and scraped. The worktable surface is grinded and scraped (reinovation of grooves as required). The X and Y axes are equipped with trapezoidal screws with nuts - placed in bearing housings. Headstock - Gearwheel bearings from reputable manufacturers, main place as well as main spindle manufacturing by Fermat, hydraulic tool clamping. Automatic lubrication is controlled centrally through the dispensers - the manufacturer Hytos. The machine has a telescopic covering of X- and Z axes. Machine surface adjustment - varnish according to RAL 5010 (blue – depending on customer´s wish). Electrical switchboard with programmable controller, control panel on headstock. CE cable lines are installed throughout the machine and between the machine and the electrical cabinets. The machine is equipped with digital measuring with linear rulers with accuracy of positioning indication 0.01mm for axes (X, Y, Z, W) including measuring of the round table by rotary sensor (in the center of the table). Optical reading of the angle after complete overhaul.
