Pressa / Raddrizzatrici / HRL 400-05/A

• Nr. di inventario 181316
• Tipo di macchina HRL 400-05/A
• Produttore Unknown
• Anno di fabbricazione 2023

RICHIEDI PRODOTTO

Soggetto a modifica dei parametri tecnici.

Descrizione

This is a new machine. The device is equipped with a control system, two handed
control, the controller of choice for two people. When ordering, it is possible
to define additional requirements for the facility and its design (table
dimensions, stroke cylinder compression power, metering rod ejection). It is
also possible to set the parameters of the speed of movement according to
customer needs.
Range of offer:
- Hydraulic straightening press HRL 400-05 / A, manufacture, assembly, delivery
and recovery at the customer
- Commercial accompanying technical documentation (user's manual, service
manual)
- Declaration of Conformity.
- Review report el. equipment.
- Service training for the safe use of equipment
- Subject of the offer is not preparing the space for mounting the device nor
the energy supply.

Other parameters:
- Distance between the cylinder from the portal: 365 mm
- Speed ​​cylinder stroke - Approach: 20 mm / sec
- Lifting speed of the cylinder - Operating: 1.5 mm / sec
- Replacing the roll speed: 40 mm / sec
- Portal Speed: 80 mm / sec
- Trolley speed cylinder: 50 mm / sec
- The maximum working fluid pressure of 32 MPa
- Voltage system: 3 + N; 50 Hz; 380 V